Gridlock 0.3.5 ETA 23/12/13
Sign up below for notification of release
All donators will be added to the beta program upon request
Gridlock: Grid Interface (M4L/MAX)
Gridlock provides an easy-to-use abstraction for using a number of grid based controllers from either inside M4L or standalone in a MAX application. All communications (to and from each supported device) are handled for you and a consistent message spec is provided for talking to each physical device.
Primarily developed for the Launchpad, supported platforms are growing. Examples of upcoming adaptors for hardware are QuNeo and Push, along with Mira, Lemur and TouchOSC interfaces for the iPad.
The target market for this product is twofold:
1) Developers in MAX/M4L that wish to use one of the supported controllers without having to write the low-level code for interfacing to the controllers can use the exposed API. Anything developed will work with any of the supported controllers without having to worry about the ins and outs of each device.
2) Musicians can use the built-in functionality for configuring the controller to provide easy access to OSC/Midi based applications that they desire. Again, the control surfaces available to you are those currently supported by the application.
- Novation Launchpad/Launchpad S
- Ableton Push
- Livid Ohm/OhmRGB
- Livid Block
- Livid Base
Current Functionality 0.3.4
- Receive updates from grid controller indicating which buttons have been pressed
- Send updates to grid controller to set button colour
- Configurable momentary value for holding buttons down
- Mini display to indicate which buttons are active/momentary
- Configuration editor for Matrix/Slider/Bend/XY/Monome modes
- User definable midi note/controller event for each grid cell/slider/bend
- Matrix mode: Mix a selection of momentary/toggle/4-way buttons.
- Slider mode: 4 banks of vertical/horizontal/inverted sliders.
- Bend mode: 4 banks of vertical/horizontal pitch bend like controls.
- XY mode: 4 banks of XY controls.
Each momentary/toggle can have it's own colour and own velocity
Each slider can have it's own colour and velocity
Add a +ve or -ve amount to a target
Each grid press sends out two controller values for controlling dual signals simultaneously
- Flash support: 5 different rates of flashing assignable to each button for configurable visual feedback
- Button grouping: Group buttons together so that only one out of the group can be active at any time
- Switch seemlessly between modes, with all state being stored for each mode
- Fine control mode for Sliders, Bends & XY
- Attack/Decay for momentary and toggle switches
- Repeat functionality to repeat the action of a button at timed intervals, for a few times or forever
- Double click support (experimental)
- Monome emulation: See below
The latest version of Gridlock supports Push encoders and also provides the option of adding an external bank of endless encoders which can be incorparated into the controller.
- Push encoders supported natively
- 8 banks for endless encoders
- Absolute and relative encoders supported
- Feedback supported for controllers that can display position information
With the increasing control options, set to build over time, a new Heads Up Display (HUD) has been provided. This allows a pop up display on your laptop to provide a quick reference to your current setup and what the grid is currently controlling. The HUD will track all changes you are making to Gridlock and can be resized as you wish to fit in with a screen layout for your performance play.
- Additional flash rates
- Fully configurable menu system to set up your controller as you want it
- Additional modes:
- Selector mode
- n-way mode (n steps per button)
- Dual slider/bend mode
- Quad XY mode
- Mixed mode (Momentary/Toggle/4-Way/n-Way/Slider/Selector/Bend/Clip)
- Pad mode
- Velocity support
- Extended preset storage
- Non-endless encoder support - 8 banks
- Custom labels - replace all your MIDI mapping with human readable text
- GridLink - Multi-launchpad support (turn multiple LPs into one big controller or create larger controllers from mixed devices) including virtual LP support
- TrackLink - Extensive mapping of the grid to Ableton Live - program the controller on the fly and hook it up to anything in Live
- LiveLink - Direct integration into the Live Interface API development: Ableton
This software is donationware. You are free to download and use it for personal, non-commercial use for free - if you like it then please come back and donate so that I can keep on producing devices such as this.
Please note that the license does not include the right to distribute any portion of the software in your own commercial devices, or any modified code in non-commercial devices - please contact firstname.lastname@example.org in order to discuss this option.
MN+ Monome Emulation (M4L/MAX)
MN+ is a Monome emulator written on top of the base controller. Current supported functionality is:
- Monome 64/128/256 emulation
- 32/64 bit
- Support for manual configuration, zeroconf and SerialOSC protocols, along with autofocus
- Support for 7 configured monome apps (this will be enhanced if there is enough interest)
- Configurable colouring at the grid cell level or by each 8x8 unit
- Support for intensity
- Multi-launchpad support
The Monome community has a great number of open source contributors who provide an outstanding mix of quality applications that cover an enourmous amount of ground. If you use this app to use those applications, please consider leaving a little contribution to the programmers involved for the effort and passion that they put into their work :)
There is quite alot of ground to cover here on different protocols, framesizes etc, so it is likely that there will be apps which do not quite work correctly - I am addressing these as they come up, but please send me a mail at the address below if there is a particular app that is not working and I'll take a look at it.
The main page for the Monome apps can be found at http://monome.org/docs/app.
If you've had a play and like what you see then please help me keep this and future products free by leaving a donation, and as word of mouth is my best advertisment, please pass on the details on to anyone else you know that might be interested! Thanks
All donators will be added to the beta program upon request